MicroPure Micron Disposable Filters

6 Sizes Available

Model & Description	Replaces Corresponding Pleated Filters
MF-170 (The original size) replaces 4-15/16" diameter, 13-5/16" length, 2-1/8" core (also the OEM replacement for the Arctic Disposable)	Unicel C-4326, C-4950, C-4625, C-4637 Pleatco PRB25IN3, PRB50IN, PRB25IN Filbur FC-2375, FC-2890, FC-2370
MF-925 replaces 4-15/16" diameter, 9-1/4" length, 2-1/8" center core	Unicel C-4335 Pleatco PRB35IN3 Filbur FC-2385
MF-1075 replaces 6" diameter, 10-1/2" length, 1-15/16" center core	Unicel C-6430 Pleatco PWK30 Filbur FC-3915
MF-1185 replaces 4-5/8" to 4-15/16" diameter, 11-7/8" length, 1-1/16 to 2-1/8" center core	Unicel C-4325, C-4327, C-4332, C-4430 Pleatco PA225, PMT25 Filbur FC-1220, FC-0640, FC-1620, FC-2625
MF-1475 replaces 4-15/16" diameter, 14-7/8" length, 2-1/8" center core	Unicel C-4301, C-4305, C-4347 Pleatco PMT 27.5, PMT50, PMT45 Filbur FC-1610, FC-1630, FC2630
MF-2012 replaces 4-15/16" diameter, 20-1/8" length, 2-1/8" center core	Unicel C-4975 Pleatco PRB75 Filbur FC-2395

Technical Information

Micron depth filters, manufactured by Micropure, filter faster and more efficiently than any other spa filter on the market. Hot tub manufacturers like Arctic Spas have tested and recommended these filters for the past 5 years. 3M Corporation has also completed independent tests with outstanding results than can be seen below.

Micron disposable filters typically last 3 to 5 months depending on use. There are many reasons to choose the Micropure alternative:

	Filter faster and more efficiently than any other spa filter.
	Quicker water recovery after heavy use, taking contaminants out of the water before they build-up and cause a decrease in sanitizers.
	Chemicals last longer with less contaminants in the water.
	Removes solids in water and lowers the TDS on a constant basis, extending the time between water changes.
	Filters out minerals, stopping buildup on your equipment and heater, extending the life of your equipment.
	No filter cleaning - simply replace after 3 to 5 months.
	Lower density at the surface of the filter with progressively higher density towards the center. This allows particles to be trapped throughout the entire cross section of the filter, creating superior dirt-holding capacity.
	Lower maintenance time and costs.
	Disposable filters are an excellent way to build repeat business with a product that is still not widely stocked by spa dealers

The effectiveness of filtration is based on 2 standards; Micron Rating (the size of particles that can be filtered) and Efficiency (the percentage of particles above a certain size that are caught by the filter). Micron disposable filters have a significantly better rating in both micron and efficiency.

* Micron Rating: The smaller the number, the smaller the particles that will get filtered out.
** The micron rating and efficiency of a pleated filter will decrease further after the first cleaning.
***Micron filters will filter out significantly more weight of debris before becoming saturated.

Directions for use:
- Place filter in hot tub and don't check filter for at least 2 months.
- The filter will start to discolor from the outside in. When you can not see any white in the center of the filter, it is time to replace.
- Expansion of the filter material is normal as it absorbs and removes debris - filtration improves as it expands.
- Do not use defoamers, clarifiers, cleaners, enzymes, stain and scale mineral removers or descummer chemicals. These chemicals are not necessary with Micron filters and will reduce the life of the filter because the filter will absorb these oils. If a spa already has these chemicals in the water, it is recommended to change the water before switching to Micron disposable filters.
- Do not clean or rinse filter - simply replace when it is full. Micron filters have been tested to last up to 5 months for low bather loads, but it is recommended to replace after 3 months for optimal filtration.